7
DIAGRAM OF THE CONTROL
A. On/Off Button—This button turns the power on
and off.
B. Power Indicator—This indicator lights when the
power is on.
C. Auto Button—This button selects the three auto
modes that automatically change the vibration fre-
quency.
D. Auto Indicator—This indicator shows which auto
mode is selected.
E. Frequency Indicators—These indicators show
which of the five vibration frequencies is selected.
F. High and Low Buttons—These buttons increase
and decrease the vibration frequency.
HOW TO PLUG IN THE ADAPTER
Plug one end of the included adapter into the vibration
platform (see assembly step 3 on page 6). Plug the
other end of the adapter into an appropriate outlet that
is properly installed in accordance with all local codes
and ordinances.
HOW TO TURN ON THE POWER
IMPORTANT: If the vibration platform has been
exposed to cold temperatures, allow it to warm to
room temperature before turning on the power. If
you do not do this, the electronic components
may become damaged.
Plug in the adapter as described above. Next, press
the On/Off button on the control. The power indicator
will light and the vibration platform will begin to
vibrate.
Note: The vibration platform will automati-
cally turn off after 10 minutes.
HOW TO CHANGE THE VIBRATION FREQUENCY
When the power is turned on, the lowest vibration fre-
quency will be selected and the lowest frequency indi-
cator will light. If a different vibration frequency is
desired, press the High or Low button repeatedly until
the desired vibration frequency indicator lights.
HOW TO USE THE AUTO MODES
Press the Auto button repeatedly to select one of the
three auto modes. The Auto indicator will light with a
different color to show which auto mode is selected.
When the first mode is selected, the Auto indicator will
be green and the third, fourth, and fifth vibration fre-
quencies will be selected in a repetitive sequence.
When the second mode is selected, the Auto indicator
will be orange and the first, second, third, fourth, and
fifth vibration frequencies will be selected in a repeti-
tive sequence.
When the third mode is selected, the Auto indicator
will be yellow and the second, third, and fifth vibration
frequencies will be selected in a repetitive sequence.
HOW TO TURN OFF THE POWER
To turn off the power, press the On/Off button. The
power indicator will darken.
Unplug the adapter
when the vibration platform is not in use.
CONTROL TROUBLESHOOTING
If the control does not function properly, make sure
that the adapter is fully plugged into a 120-volt outlet.
HOW TO USE THE VIBRATION PLATFORM
A
B
E
D
F
C
All manuals and user guides at all-guides.com
