background image

Thank you for selecting the WESLO

®

SPORT 350

treadmill. The SPORT 350 treadmill combines 
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you’re not exercising, the unique SPORT 350 can be
folded up, requiring less than half the floor space of
other treadmills.

For your benefit, read this manual carefully before
you use the treadmill.

If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model
number and serial number before calling. The model
number of the treadmill is WLTL33205.0. The serial
number can be found on a decal attached to the tread-
mill (see the front cover of this manual for the location). 

To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
www.wesloservice.com/registration.

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

4

Handrail

Upright

Storage Latch

Key/Clip

Circuit Breaker

Walking Belt

Cushioned Walking Platform

for maximum exercise comfort

Foot Rail

Power Cord

BACK

RIGHT SIDE

Rear Roller  
Adjustment Bolts

Console

Water Bottle Holder

(Bottle not included) 

Incline Leg

Summary of Contents for Sport 350 Treadmill




















Reviews: