5
3. Hold the Console (9) near the Upright (6). Insert the
console cable and the console wire into the indicated
hole and down through the Upright. Attach the
ground wire to the Upright with an M4 x 16mm
Screw (21).
Insert the excess wire and cable into the Upright (6).
Attach the Console (9) to the Upright with four M4 x
16mm Screws (21).
Make sure that the wires and
the cable are not pinched.
9
6
21
21
Ground Wire
Hole
Console Wire
Console Cable
21
2. The Console (9) requires three “AA” batteries (not
included); alkaline batteries are recommended. Insert
three batteries into the Console as shown.
Make sure
that the batteries are oriented as shown by the dia-
gram inside the Console.
Batteries
9
2
1. Attach the Front Stabilizer (2) to the front of the
Frame (1) with two M10 x 75mm Carriage Bolts (35)
and two M10 Nylon Locknuts (45).
2
1
35
45
1
3