7
5
6
28
33
15
20
21
21
49
49
19
29
4. Press the Side Shield Cover (40) onto the Left and
Right Side Shields (1, 2).
5. Insert the Seat Post (20) into the Frame (15). Align
one of the holes in the Seat Post with the hole in
the Frame. Insert the Seat Knob (29) into the Frame
and the Seat Post, and tighten the Seat Knob into
the Frame. Make sure to insert the Seat Knob
through one of the holes in the Seat Post; do
not insert the Seat Knob under the Seat Post.
Attach the Seat (19) to the Seat Post (20) with three
M8 Nylon Locknuts (21) and three M8 Split Washers
(49). Note: The Nylon Locknuts and Split Washers
may be pre-attached to the bottom of the Seat.
6. Identify the Left Pedal (28); there is an “L” on the
Left Pedal for identification. Using an adjustable
wrench, tighten the Left Pedal counterclockwise into
the left arm of the Crank (33).
Tighten the Right Pedal (not shown) clockwise into
the right arm of the Crank (33).
40
2
1
4
7. Make sure that all parts are properly tightened
before you use the exercise cycle. Place a mat
under the exercise cycle to protect the floor or car-
pet. Note: Some hardware may be left over after
assembly is completed.
