7
4
14
31
8
28
17
3
5
3. Attach the Handlebar (5) to the Handlebar Post (14)
with two M10 x 25mm Button Screws (8) and two
M10 Split Washers (31).
4. Identify the Left Pedal (28); there is an “L” on the
Left Pedal for identification. Using an adjustable
wrench, tighten the Left Pedal counterclockwise into
the left arm of the Crank (17).
Tighten the Right Pedal (not shown) clockwise into
the right arm of the Crank (17).
5. Make sure that all parts are properly tightened before you use the exercise cycle. Place a mat under
the exercise cycle to protect the floor. Note: Some hardware may be left over after assembly is completed.
