7
STEP 3
A: Fix the Swing bar (6L) on the long axle
of the Handlebar post (2) with Hex bolt
(24), Spring washer (52), Flat washer (25),
Waveform washer (54) and Long axle (27)
as shown. Please do not tighten them this
time.
B: Attach the connecting joint together with
Pedal Support (5L) to the Crank (22) us-
ing Pedal support bolt (38L), Waveform
washer (62), Spring washer (41) and Nylon
nut (42L) as shown. Please do not tighten
them this time.
C: Connect Swing bar (6L) with Pedal sup-
port (5L) using Hex bolt (30), Flat washer
(31) and Nylon nut (32). Tighten the Hex
bolt (24) (30) and Nylon nut (42L). Finally
Cover the Nut caps (23) (57) (43) (36).
D: Fix the Pedal support (5R) and Swing
bar (6R) to Crank (22) and Handlebar post
(2) in the same way.
E: Fix the Pedal (10L/R) to the Pedal sup-
port (5L/R) with Hex bolt (33), Flat washer
(34) and Nylon nut (35).
STEP 4
A: Put the Pulse sensor wire (50) through
the handlebar post (2) and then out of the
hole of the computer bracket. Fix the arm-
rest (8) on the handlebar post (2) with Hex
screw (51) and Spring washer (52) and
then cover the Handlebar chuck cover (53)
to the related position.
B: Attach the Handlebar (7L/R) to the
Swing bar (6L/R) using Carriage bolt (45),
Arc washer (44) and Acorn nut (58).