7
2. Pivot the console assembly to the desired posi-
tion and tighten the Console Knobs (37).
Always make sure that the Console Knobs
(37) are fully tightened before you use the
treadmill.
3.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-
mill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages
14 and 15).
2
37
Console
Assembly
