8
DIAGRAM OF THE CONSOLE
BATTERY INSTALLATION
The console requires
three “AA” batteries
(not in-
cluded); alkaline batteries are recommended. To install
batteries, open the battery cover as shown in the draw-
ing below. Press three batteries into the battery com-
partment, with the negative (–) ends of the batteries
touching the springs. Close the battery cover.
CAUTION:
Before operating
the console, read the following precau-
tions.
• Do not stand on the walking belt when
turning on the power.
• Always wear the clip (see the drawing
above) while operating the treadmill.
When the key is removed from the con-
sole, the walking belt will stop.
• Adjust the speed in small increments.
• The training zones marked around the
speed control are general guidelines only.
See pages 14 and 15 for more information.
• To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liq-
uids on the console. Use only a sealed
water bottle.
Batteries
Battery Cover
Monitor Displays
Pulse Sensor
Clip
Key
Note: If there is a thin sheet of
clear plastic on the face of the
console, remove it.
Speed Control