background image

14

Memorizing Channels

The TV is equipped with a channel memorizing func-
tion that allows you to step up or down from the current
channel to the next channel set into memory. Before
channels can be selected in this way, they must be set
into the TVÕs memory. 

Note: When programming

channels, if no buttons are pressed for four sec-
onds, the TV will return to the normal screen.

Automatic Memory Tuning

1. Press the MENU button

to turn on the pop-up
menu in the TV mode or
CATV mode. Press the
MENU button again to 

select CH MEMORY
(channel memory).

2. Press the MENU button

again to select AUTO
MEMORY.

3. Press the + button to

start AUTO MEMORY.
The TV will begin setting
into memory all the chan-
nels available in your
area. When no broadcast
signal is detected on a
channel, the channel is
erased from memory. When a signal is detected, the
channel is stored in memory and the next channel is
selected.

This process will be re-
peated until the highest
channel is reached. It then
stops at the lowest channel
stored in memory, and re-
turns to a normal screen
after four seconds. The TV
will then be in the SKIP
mode.

Erasing Channels

After all channels available in your area have been set
into memory, you can erase unwanted channels by fol-
lowing the steps below:

1. Select the unwanted channel by using the CHANNEL

and 

▼  

button.

2. Press the MENU button

to turn on the pop-up
menu. Press the MENU
button again to select CH
MEMORY.

3. Press the + or Ð button to

move the arrow to MEM-
ORY ADD¥ERASE.
Select MEMORY
ADD¥ERASE by pressing
the MENU button.

4. Press the Ð button to

erase the stored channel
from memory. The chan-
nel number will change
from green to red.

Adding Channels

Channels that are not in memory can be stored manu-
ally. To manually store a channel, follow the steps
above, but press the + button when MEMORY ADD¥
ERASE is selected. The channel will be stored in
memory, and the channel number will change from red
to green.

CHANNEL PROGRAMMING

CH MEMORY
ANALOG
CLOCK/TIMER

TV

07

AUTO MEMORY
START [+]

TV

07

AUTO MEMORY
END

AUTO MEMORY
SEARCH/SKIP
MEMORY ADD

¥ERASE

TV/CATV

CH MEMORY
ANALOG
CLOCK/TIMER

AUTO MEMORY
SEARCH/SKIP
MEMORY ADD

¥ERASE

TV/CATV

TV

07

CHANNEL MEMORY
END

ERASE

[ + ]

[ Ð ]

Summary of Contents for Cadence 36



























Reviews: