6
2. Whilst another person lifts the back of the Frame (1),
attach the Rear Stabiliser (28) to the Frame with two
M8 x 53mm Button Bolts (34), two M8 Washers (48),
and two M8 Nylon Locknuts (38).
34
28
48
48
1
2
38
3. Insert the Console Bracket (63) into the Upright (2) as
shown. Attach the Console Bracket to the Upright with
an M8 x 25mm Button Screw (45), two M8 Split
Washers (59), and two M8 x 19mm Button Screws
(68).
4. The Console (23) requires three 1.5V “AA” batteries;
alkaline batteries are recommended. Insert three bat-
teries into the battery compartment.
Make sure that
the batteries are oriented as shown by the diagram
inside the battery compartment.
63
45
59
68
59
68
2
3
5. Have another person hold the Console (23) in the
position shown. Insert the control cable down through
the Upright (2). Connect the console wire to the Upper
Wire (44). Attach the ground wire to the Console
Bracket (63) with an M4 x 16mm Screw (42). Next,
insert the excess cable and wire down into the Upright.
Attach the Console (23) to the Console Bracket (63)
with four M4 x 16mm Screws (42).
Be careful to
avoid pinching the cable and wires.
Make sure that the resistance knob is turned to the
lowest setting before continuing.
4
23
23
5
Batteries
63
42
2
42
Control Cable
Resistance
Knob
Console Wire
Ground
Wire
44
All manuals and user guides at all-guides.com
all-guides.com
