Weslo bench600 User Manual Download Page 1

Page: 1 / 10

Model No. WLEMBE71000
Serial No.

Write the serial number in the
space above for reference.

Part No. 171938 R1100A

CAUTION

Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

ORDERING REPLACEMENT PARTS

If you encounter any difficulties or problems with this product, contact the ICON Fitness Lifestyle Ltd. office, or
write:

ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire

Tel: Country Code: 0345-089009

Fax: 0113-2411120

To help us assist you, please be prepared to give the following information:

• The MODEL of the product (WLEMBE71000)

• The NAME of the product (WESLO

BENCH 600 weight bench)

• The SERIAL NUMBER of the product (see the front cover of this manual)

• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 15 and the EXPLODED

DRAWING attached in the centre of this manual).

USER'S MANUAL

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

QUESTIONS?

As a manufacturer, we are
committed to providing
complete customer satisfaction.
If you have questions, or if
there are missing parts, we will
guarantee complete satisfaction
through our Customer Service
Department.

Please CALL:

Or WRITE:
ICON Health & Fitness Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire

0345-089009

Serial

Number

Decal

Summary of Contents for bench600











Search results

Summary of Contents for bench600

Reviews:

Related manuals for bench600

Brands by name

Popular brands

Weslo bench600, User Manual

Search results

Summary of Contents for bench600

Reviews:

Related manuals for bench600

Brands by name

Popular brands