8
88
6
6. Attach the Water Bottle Holder (29) to the
Upright (2) with two M4 x 16mm Self-tapping
Screws (52).
Identify and orient the Console Cover (88) as
shown.
Slide the Console Cover (88) onto the Upright
(2).
7. Identify the Left and Right Handlebars (85, 86),
which are marked with “Left” and “Right” stick-
ers.
While a second person holds the Left and Right
Handlebars (85, 86) near the Upright (2), insert
the Pulse Wires (84) into the holes in the
Upright and pull them upward out of the Upright.
Tip: Avoid pinching the wires.
Attach the Left
and Right Handlebars (85, 86) to the Upright (2)
with an M8 x 80mm Patch Bolt (79) and an M8
Locknut (38).
Do not tighten the Patch Bolt
yet.
Make sure that the M8 x 80mm Patch Bolt
(79) is inserted through the bottom hole in
the Left and Right Handlebars (85, 86) and
the Upright (2).
7
2
29
52
85
38
86
79
84
84
2
Avoid pinching
the wires