7
WESAUDIO
4/25/16
TIMBRE USER MANUAL
3.
Linking compressors
To link two compressors to work in stereo mode, you need simple Jack-Jack 6.3mm mono
cable. Just connect two compressors together with this cable and activate “Link” function
on both compressor. From now on both compressors will use common compression signal.
For proper operation in stereo mode, both compressors should have exactly the same
settings.
4.
Maintenance
Compressor does not require any technical maintenance during the warranty period. Please
keep it in dry place free from any dust or moisture.
5.
Specifications
Frequency response: 20Hz-30kHz (0.5dB)
THD+N: up to 1%
Input impedance: transformer balanced: 600ohm
Output impedance: transformer balanced: 600ohm
Tubes: 6386, 12AT7, 12AX7, EAA91
Max gain: 45dB
Max gain reduction : 40dB
Mode: single, double,triple
Balanced output and input (XLR Amphenol)
Case Rack 2U
Dimensions : 88 x 483 x 235 mm
Box dimensions : 55 x 39 x28 cm
Weight 7kg
