WERTHEIM W5030, Instruction Manual

Page: 4 / 8

Congratulations on choosing the Wertheim system
Complett. It has been designed to give you many
years of reliable service. Your Wertheim System
Complett includes a comprehensive range of
cleaning tools to effectively clean carpets, hard
floors, upholstery, drapes and do your household
dusting. A very important feature is the Whirlwind
motorised powerbrush used for cleaning carpet.
Carpets are a costly investment, and they usually
harbour damaging grit, dust mites and microscopic
particles which can cause allergies and breathing
difficulties. Your Wertheim removes this dust and
grit by combining the suction of the cleaner with
the agitator action of the powerbrush.
We strongly recommend you to use the power-
brush attachment for all carpet cleaning. There is
a separate floor tool supplied for cleaning hard
floors.
Your Wertheim also features a four stage air filter
system comprising a double wall filter bag plus
a motor protection filter and final exhaust micro
filter.
1 . Start/stop
2 . Handle with cord reel
3 . Suction control
4 . Bag-full indicator
5 . O2 HEPA filter indicator
6 . Power outlet for the use of power driven
tools
7 . Release button, exhaust vent
8 . Accessory compartment
9 . Cover
10 . Parking position
Check when unpacking that the vacuum
cleaner is undamaged and that all parts are
there.
The vacuum cleaner is accompanied by:
11 . In the accessory compartment:
a) Dusting brush
b) Crevice nozzle
c) Upholstery nozzle
12 . Floor nozzle
13 . Hose with connecting piece (13a)
and hose handle (13b)
14 . Telescopic tube
15 . Dust bag
16 . Power brush
When moving the vacuum cleaner (e.g. in
stairs), lift it by the handle (2).
A Lift the lid of the bag compartment and
check that the dust bag is in place. Snap the
hose into the vacuum cleaner as shown in the
picture. When removing the hose, press the
catch at the coupling and withdraw.
B Attach the extension tubes to the hose
handle and the floor nozzle. When discon-
necting, twist slightly and pull apart.
C Extend the cord and connect to the mains.
D The vacuum cleaner is switched on and off
using the rolling wheel on the top of the vacuum
cleaner.
E The suction effect can be set using the
rolling wheel on the top of the vacuum cleaner.
F Use the floor nozzle when cleaning floors.
The nozzle can easily be adapted to hard floors
or carpets with the aid of a pedal on its top.
To maintain the suction effect, the floor nozzle
should be regularly cleaned. The simplest way
to do this is to use the hose handle.
G The powerbrush comes with its own motor
and should be used to increase the efficiency
of the cleaner on carpet. Push tube into
powerbrush and fix it by using the press button
lock. Plug powerbrush lead into outlet located
at the front of rod handle.
H Plug powerbrush lead into power socket
on cleaner. To operate the powerbrush when
cleaner is switched on, use the on/off switch
on the handle of rod.
I Tube and nozzle can be attached in a
horizontal ”parking” position.
J After use, the cord is disconnected by
pulling the plug, never the cord . The vacuum
cleaner is equipped with an automatic cord
reel. The cord is rewound by pressing on the
handle. Keep a gentle grip on the plug when
the cord is being reeled in to avoid damage.