6
Attaching the handle to the appliance
1. Take the handle and unscrew both screws
from the bottom ends of the handle.
Note: You will need a phillips head screwdriver.
2. Insert the handle onto the adapter of the
unit body and screw the screws back into
the boreholes.
INSTRUCTIONS FOR USE
THE APPLIANCE SHOULD BE SWITCHED OFF AND DISCONNECTED
FROM THE POWER SUPPLY BEFORE YOU START TO ASSEMBLE.
Assembling the Water Tanks
Assembling Your Cleaner
1. Lay the dirty water tank in the base of the unit
and fold down the handle of the tank until it
audibly engages.
2. Insert the fresh water tank into the unit body. First
insert the valve into the round depression on the
backside of the appliance and then press the
top of the tank against the centrepiece until it
audibly engages.
3. Turn the lower hooks of the cable reel
downward and wrap the power cable around
both hooks of the cable reel.
