background image

Power Clean 

W4000

27

This warranty on your cleaner commences 

from the original date of purchase and is not 

transferable; please retain your original proof of 

purchase for any warranty claims. This warranty 

is valid only in the country where the cleaner 

is purchased.
The cleaner must be operated in accordance 

with these instructions and used only for domestic 

household cleaning to remove DRY dirt and dust 

from  household  carpets,  flooring  and  fabrics. 

This  cleaner  is  not  fit  to  be  used  as  an  industrial 

cleaner, and is not designed for the collection 

of vitreous building material including particle 

board, construction products and similar products 

such  as  wood/fibres,  cement,  fillers,  fibre  glass 

etc or excessive or frequent sand. The infrequent 

pick-up of these materials in these circumstances 

may be harmful to your cleaner and may void the 

manufacturer’s warranty.
Accessories and consumables including dust 

bags and filters, unless defective in manufacture, 

are not subject to this warranty. In order to prolong 

the life of accessories and consumables, regular 

care and maintenance is recommended.
When properly used and cared for, your 

cleaner will render excellent service; refer to the 

instruction manual for further details, as misuse 

or failure to follow the instructions makes this 

warranty void.
In the event of service or advise being needed, 

please contact International Cleaning 

Solutions Pty. Ltd. Level 1, Building 2, Brandon 

Business Park, 530 Springvale Road, Glen 

Waverley Victoria 3150, AUS: 1300 815 270, 

NZ:  (09)  263  7573,  Monday  –  Friday,  9am-5pm 

EST. Email: [email protected]

The decision to repair or replace the cleaner is 

at the sole discretion of International Cleaning 

Solutions Pty Ltd.
International Cleaning Solutions Pty Ltd is 

unable to accept responsibility under this 

warranty for any repair work not carried out by 

an authorised International Cleaning Solutions 

Service  Agent  or  from  the  use  of  non-genuine 

parts. If any part is no longer available or 

manufactured, International Cleaning Solutions 

Pty Ltd will replace it with a genuine functional 

replacement part. This warranty does not apply 

to the cost of replacing any parts of the product 

due to normal wear and tear, alterations, 

improper installation, physical abuse, misuse or 

accidental damage. Any transportation costs 

involved in the repair of defective parts shall be 

borne by the claimant.
If proof of purchase cannot be provided at the 

time of a warranty claim or service, any work 

carried out on the cleaner is chargeable. The 

repair or replacement of the cleaner under this 

warranty does not extend the original period 

of warranty.

The  benefits  conferred  by  this  warranty  are 

in addition to all other rights and remedies 

in respect of the product as outlined under 

the Trade Practises Act and other State and 

Territory laws.
“Our goods come with guarantees that cannot 

be excluded in the Australian Consumer Law. 

You are entitled to a replacement or refund for 

a major failure and for compensation for any 

other reasonably foreseeable loss or damage. 

You are also entitled to have the goods repaired 

or replaced if the goods fail to be of acceptable 

quality  and  the  failure  does  not  amount  to  a 

major failure.” 

online

www.wertheim.net.au 
www.wertheim.co.nz

email

[email protected]

Summary of Contents for Power Clean W4000





























Reviews: