Pegasus Wing Duo Plus Retro-Fit Kit
1.4 Activating the Lower Manual and how it talks to the Pegasus Wing
Now that you have your Lower Manual connected to the Pegasus Wing, you are ready to switch up your new instrument. Turn on your Pegasus
Wing keyboard.
Now power up your Lower Manual. (Press the Power Button located underneath the keyboard (right hand side).
Now wait for the Pegasus Wing to fully load.
Now, we must tell the lower manual to transmit on MIDI Channel 2 so that the Pegasus Wing can take commands from the Lower Manual.
1.5 Choosing MIDI Channel 2
Choosing the MIDI Channel is very easy. Follow these steps:
1. Hold down the two small rubber buttons next to the Power Button at the same time.
2. While holding the two small rubber buttons, you must now press the C#1 key on the Lower Manual.
The display of the Pegasus Wing will now register your Chord Changes on the main display (upper left of the display) and you will of course
hear a sound when you play the Lower Manual!
PLEASE NOTE: Please make sure that a either Lower Selector 1 and 2 are activated (turned on) and that they have their volumes
audible (drawbars pulled out, or preset). We know some customers do not use any sounds on the Lower Manual / Left Hand, but of
course this new retrofit design greatly encourages you to use the fantastic sounds available for a richer and more exciting playing
experience!
OK! You’re ready to go!