Rocktab S100 User Manual
45 / 76
[ ] The coffee machine is set up and connected
[ ] The coffee machine is switched off
Presentation of action steps
In fixed sequence
Instructions for action in a fixed order are numbered consecutively. The sequence of the work steps must be
strictly observed.
Example of an instruction for action with fixed sequence:
1.
Remove the water tank (A) from the coffee machine.
2.
Fill the water tank with water.
3.
Put the water tank back into the machine.
In no fixed sequence
Instructions for action in no particular order are marked with the bullet point.
Example of an instruction for action without fixed order:
Clean the outside of the unit with a soft, damp cloth and a commercially available dishwashing
detergent.
Rinse the drip tray and the coffee pad container with a soft, damp cloth and a commercially
available dishwashing detergent.
Presentation of results
For many activities it is necessary to carry out the work steps with intermediate results and final results.
Intermediate results represent procedures that are not carried out by the user and are marked with an arrow
->.
Final results indicate the end of the action and are marked with a double arrow =>.
Example of an action instruction with results:
4.
Switch the coffee machine on at the main switch (1).
-> The coffee machine warms up as long as the main switch is flashing. If the
main switch permanently, the coffee machine is ready for use.
5.
Place a container under the spout
.
6.
Press the main switch (1) again.
=> The coffee is prepared. The coffee dispensing function ends automatically.
Further notes
WEROCK Technologies GmbH is also abbreviated as "WEROCK" in these operating instructions.
These operating instructions are only available in digital form for reasons of operability and environmental
protection. Should you require a printed manual, you are welcome to request it from us in the desired
quantity free of charge. Please note that printed instructions do not include a search function and do not
offer any interactive functions. At the same time there is no automatic update and extension of the manual.
