background image

5

Setup & Use 

5

Note the sloped shape of the ladder feet and 

location of the wall bumper square pads and then 

place the extended ladder forwards and at an angle 

of 75 degrees to the ground and supported at the 

top.
You can verify this by placing your feet in front of 

the ladder’s feet and firmly holding the ladder.

90°

75°

6

Never stand on the top four rungs and hold on to 

the stiles firmly for your own safety and comfort. 

When using the ladder in a partially extended state 

(with the unextended section on top), do not place 

your feet higher than the fifth rung from the top (the 

unextended section is considered the first rung).

7

To close the ladder, support the ladder in an 

upright position with on hand and depress and 

then release both ladder lock release buttons with 

the other hand.
Place one foot on the bottom rung to stabilise the 

ladder and guide the rungs downwards with both 

hands.
Ensure that your hands are more than two rungs 

apart so that they do not get caught between rungs.

8

Transport the ladder fully closed and hand carry 

under arm with one hand hold the handle that is 

underside of the second rung.

Summary of Contents for Telescopic Soft Close Extension Ladder









Reviews: