8
MiniMax
Instruction Manual
2.4
Stabilisers
Platform Height
X
Y
0.6m
2.06m 2.06m
1.7m
2.77m 2.96m
3.7m
2.77m 2.96m
5.8m
4.42m 4.42m
X
Y
90%
SP4 and SP10 stabilisers must always be fully extended.
Position the lower clamp so that the arm is as close to horizontal as possible. Adjust
the position of the top clamp to ensure the stabiliser foot is in firm contact with the
ground. Ensure the clamps are secure.
2.5
Adjustable Legs
If the ground is uneven or sloping you will need to fit
adjustable legs. Turn the base unit upside down so
that the wheels are facing upwards. We recommend
that two persons are required to ease the process.
Using a 19mm spanner loosen the fixing bolt and
remove the castor from the base.
Follow the instructions in the adjustable leg pack to
change the large castor spigot to the smaller one supplied in the
pack. Insert the castor into an adjustable leg and then retighten
the fixing bolt with the spanner, following the instructions. Repeat
this process for the other castors and adjustable legs. Insert the
four leg and castor assemblies into the base unit.
Turn the base the correct way up with the wheels on the ground.
Use a spirit level to check the base unit is level.
Adjust the legs as necessary, to level the base unit.
Important - Only use the adjustable legs to level the base
and not to gain extra height.
2
Building The Tower
PN00063300_Minimax_IM_RevD 0522.indd 8
PN00063300_Minimax_IM_RevD 0522.indd 8
01/06/2022 10:54
01/06/2022 10:54
