background image

2

GENERAL SAFETY INFORMATION

These User Instructions are not to be removed except by the user of this equipment.  Current User 
Instructions must always be available to the user.  

USE INSTRUCTIONS AND LIMITATIONS

I

MPORTANT

Before use, the user must read and understand these User Instructions. Keep these User Instructions 
for reference.

P

URPOSE

Self-Retracting Lifelines are designed to be used as part of a complete personal fall arrest system.

U

SE

 I

NSTRUCTIONS

1. 

Failure to follow all instructions and limitations on the use of the SRL may result in serious 
personal injury or death. 

2. 

Before using a personal fall arrest system, employees must be trained in accordance with the 
requirements of OSHA 29 CFR 1910.30 and 1926.503 in the safe use of the system and its 
components.

 

WARNING!

1. 

Failure to follow all instructions and limitations on the use of Self-Retracting Lifelines 
(SRL) may result in serious personal injury or death.

2. 

Minors, pregnant women and anyone with a history of either back or neck problems 
should not use this equipment.

3. 

Do not use or install equipment without proper training from a “competent person” as 
defi ned by OSHA 29 CFR 1926.32(f).

4. 

SRL’s are designed for a single user.

5. 

Not all fall protection and rescue components are rated for the same user weight 
capacity.  Only use components rated for the same weight capacity.  

6. 

Caution must be taken when using SRL near moving machinery, electrical hazards, 
sharp edges, or abrasive surfaces. Contact with these elements may cause equipment 
failure, personal injury, or death.

7. 

Do not expose SRL to chemicals or harsh solutions which may have a harmful effect.

8. 

Personal fall arrest systems, including SRL’s, must be inspected prior to each use for 
wear, damage and other deterioration. Defective components must be immediately 
removed from service in accordance with the requirements of OSHA 29 CFR 1910.140 
and 1926.502.

9. 

The SRL is designed to be used in temperatures ranging from -40°F to +130°F (-40°C to 
+54°C).

10.  Do not use if inspection reveals any defect, wear, damage, deterioration, inadequate 

maintenance, or unsafe condition. Do not use any equipment that has been subjected to 
the forces of arresting a fall or if any part of the load indicator warning is showing.

11.  Not suitable for leading edge applications. 
12.  Never attach the unused leg of the lanyard back to the harness at any location other 

than the lanyard parking attachment.

13.  Only lanyards designed for tie-back are approved for tie-back directly onto the webbing.
14.  Do not work on the far side of an opening, opposite the SRL anchor point.
15.  Only Werner Co., or persons or entities authorized in writing by Werner Co., shall make 

repairs or alterations to the equipment.

16.  Alterations or misuse may result in serious personal injury or death.

CAUTION!

If an SRL is used in conjunction with a cross-arm strap anchorage connector, other 
anchorage extension, horizontal lifeline, or extended D-ring, the additional length of 
the anchorage connector, extended D-ring, or sag from the lifeline must be taken into 
consideration during the clearance calculation process.

Summary of Contents for AUTOCOIL 2













Reviews: