3.
What You (Might) Need
• Projector/display with HDMI interface (Required)
• Ethernet cable (Required if you want to disable the WiFi
of the WiCS-2100)
• Windows or Mac computer
• Apple iPhone, iPad or iPod touch
• Android phone or tablet
• Speaker
• USB mouse/keyboard
• USB HID touch screen/IWB device
4.
Hardware Installation
1)
Connect the WiCS-2100 to the projector/display through the HDMI port and turn on the
projector/display power.
2)
Connect the power adapter to the WiCS-2100 to turn on the device. The system is ready when the LED
indicator turns blue.
• The default standby screen as shown below will be displayed when the system is ready.
3)
If you disable the WiFi of the WiCS-2100, you need to connect the device to an existing IT network
through an Ethernet cable.
4)
Insert the speaker cable to the WiCS-2100 audio jack for enhanced audio output.
5)
Insert the USB mouse/keyboard/touch device to the WiCS-2100 front/rear USB port for OSD
(On-Screen Display) control or remote control.
