Wenglor SEFG Muting, Operating Instructions Manual

Page: 48 / 187

Project Engineering 48
5.2 Functions
This section contains important information on the functions of the ESPE and their usage conditions.
5.2.1 Functions Overview
Detailed descriptions of the individual functions can be found in the following sections.
Section SEFG muting SEFG muting/
blanking
Operational functions
Safety operating mode / automatic restart Section 5.2.3.1 X X
Restart inhibit (RES) Section 5.2.3.2 X X
Contactor monitoring (EDM) Section 5.2.3.3 X X
Beam coding Section 5.2.3.4 X X
Cascading Section 5.2.3.6 X X
Range switching Section 5.2.3.5 X X
Muting functions
Cross muting Section 5.2.4.3 X X
2-sensor linear muting Section 5.2.4.4 X X
4-sensor linear muting (sequence monitoring) Section 5.2.4.5 X X
4-sensor linear muting (time monitoring) Section 5.2.4.6 X X
Adjustable muting duration Section 5.2.4.7.2 X X
Belt stop signal Section 5.2.4.7.3 X X
Muting enable Section 5.2.4.7.4 X X
Direction setting Section 5.2.4.7.5 X X
Muting end through clearing of the ESPE Section 5.2.4.7.6 X X
Partial muting Section 5.2.4.7.7 X X
Full Muting Enable Section 5.2.4.7.8 X X
Gap suppression Section 5.2.4.7.9 X X
Override Section 5.2.4.7.10 X X
Blanking functions
Fix blanking Section 5.2.5.2 − X
Fix blanking with edge tolerance Section 5.2.5.3 − X
Floating blanking Section 5.2.5.4 − X
Reduced resolution Section 5.2.5.5 − X