16
Settings
6. Settings
The switching distance to the object can be taught in for both outputs by pressing the teach-in key on the
sensor
(default setting is foreground teach-in).
Teach-In for Switching Output 1
1. Mount the sensor in accordance with the mounting instructions.
2. Press and hold the teach-in key until switching status indicator LED A1 starts blinking.
3. Release the teach-in key after 2 seconds.
4. The distance is taught in and the LED at output 1 lights up in order to confirm successful teach-in.
Teach-In for Switching Output 2
1. Mount the sensor in accordance with the mounting instructions.
2. Press and hold the teach-in key until switching status indicator LED A2 starts blinking.
3. Release the teach-in key after 5 seconds.
4. The distance is taught in and the LED for output 2 lights up in order to confirm successful teach-in.
NOTE!
If teach-in is conducted without an object or if the object is too far from the sensor, switching
distance is set to the end of the setting range.
7. Functions Overview
Further settings can be entered to the sensor via the IO-Link interface or NFC.
7.1 Teach Mode
7.1.1 Foreground Teach-In
Teaching in progress while the sensor is focused on the object. The switching distance is then automatically
set to a distance which is slightly greater than the clearance between the sensor and the object. The sensor
is thus activated for all objects whose distance to the sensor is equal to or less than the distance to the object
used for the Teach-In procedure.
Object
Sensor
Teach-in distance
Switching point
