13
Reflex Sensor
Required action in case of fault:
NOTE!
• Shut down the machine.
• Analyze and eliminate the cause of error with the help of the diagnostics information.
• If the error cannot be eliminated, please contact wenglor’s support department.
• Do not operate in case of indeterminate malfunctioning.
• The machine must be shut down if the error cannot be unequivocally clarified or reliably
eliminated.
DANGER!
Risk of personal injury or property damage in case of non-compliance!
The system’s safety function is disabled. Personal injury and damage to equipment.
• Required action as specified in case of fault.
6. Settings
• Adjust and securely mount the sensor such that the spot strikes the object to be detected.
• Turn the potentiometer all the way to the left.
• Turn up the potentiometer until activation occurs and, if required, turn it up a bit more for increased switch-
ing reliability.
7. I/O-Link
Further settings are possible via the IO-Link interface. The IODD can be found at www.wenglor.com in the
product’s download area.
Summary of Contents for P1KT Series
Page 15: ...15 Reflex Sensor ...