35
8.6. Device Test
For a functional description of the device test see chapter “7.5. I/O Test” on page 15
The test is activated if at least one parameter is changed.
The duration of the test is limited to 10 minutes. After this time the test is terminated automatically. The remain-
ing duration of the test is shown below the “Switch off” button and below the display window. The test can be
terminated prematurely by clicking on “Switch off”.
Please note: Settings are also preserved in the online state.
9. Maintenance Instructions
• This wenglor Sensor is maintenance-free.
• It is recommended to clean the lens and the display regularly and to check the socket connections.
• Do not use any solvents or cleaning agents to clean the Sensor, which could damage the device.
10. Proper Disposal
wenglor sensoric gmbh does not take back unusable or irreparable products. When disposing of the products,
the relevant national regulations for waste disposal apply.
11. EU Declaration of Conformity
The EU declaration of conformity can be found on our website at www.wenglor.com in download area.
