background image

4

General

1.3 Limitation of Liability

• The product has been developed in consideration of the current state-of-the-art and applicable standards 

and guidelines. Subject to change without notice.

• A valid declaration of conformity can be accessed at www.automationdirect.com in the product’s separate 

download area.

• wenglor sensoric elektronische Geräte GmbH (hereinafter referred to as “wenglor”) excludes all liability in 

the event of:

• Non-compliance with the instructions
• Use of the product for purposes other than those intended
• Use by untrained personnel
• Use of unapproved replacement parts
• Unapproved modification of products

• These operating instructions do not include any guarantees from wenglor with regard to the described 

procedures or specific product characteristics.

• wenglor assumes no liability for printing errors or other inaccuracies contained in these operating instruc-

tions, unless wenglor was verifiably aware of such errors at the point in time at which the operating instruc-
tions were prepared.

1.4 Copyrights

• The contents of these instructions are protected by copyright law.
• All rights are reserved by wenglor.
• Commercial reproduction or any other commercial use of the provided content and information, in particu-

lar graphics and images, is not permitted without previous written consent from wenglor.

Summary of Contents for OPT2172-74






















Reviews: