11
Inductive Sensors
5.3 Installation Instructions
5.3.1 Installation Instructions in Accordance with Standard
A
A
B
C
D
1,5×Sn
8×Sn
Gegenüberliegender Einbau für induktive Sensoren:
… mit Standardschaltabständen der Bauform IJ
(Ø 4 mm) und IL (M5)
… mit Ganzmetallgehäuse
… mit Korrekturfaktor 1
… mit Analogausgang
… mit selektivem Verhalten
Gegenüberliegender Einbau für induktive Sensoren:
… mit Standard
schaltabständen
… mit erhöhten
Schaltabständen
… mit IO-Link
Installation dimension
Description
A
Minimum distance from sensor to damping material (e.g. steel).
B
Minimum distance between two inductive sensors.
This clearance applies to installation in air. If the sensors are installed within an
attenuating material (e.g. steel), this distance is reduced. Testing in the applica-
tion is required in order to determine the exact distance.
C
Minimum distance from the sensing face of the inductive sensor to the damping
material (e.g. steel).
Distance C does not make reference to the object to be detected, but rather
to the background. The object to be detected is detected within the switching
distance.
D
Minimum dimension by which the sensor (sensing face) must protrude from the
damping material (e.g. steel).
8 × Sn
Installation opposite each other Two identical sensors must be mounted at this
minimum distance.
