Wenger Tourmaster Storage Cart Owner'S Manual Download Page 10

10

TO STORE RISERS ON THE STORAGE CART

CONTINUED

LOAD FOURTH STEPS ONTO THE CART

1. Place the first 4th-Step onto the top set of Swing Arms with the carpet side down and the

Positioning Wheels facing outward (away from the Swing Arm Post).

2. Place the second 4th-Step with the carpet side up with the positioning wheels facing outward.
3. Place the third step carpet side down with the positioning wheels facing outward.
4. Place the fourth step carpet side up with positioning wheels facing outward.

Storage Cart

Swing Arm Post

4th-Steps, Folded, 

Carpet

Side Down

Positioning Wheels

2. Fasten the Cinch Straps around the stacked 4th-Steps. 

Back Rails and Folded Risers
are not shown for clarity.

Storage Cart

Cinch Strap

Storage Cart Cross Bar

4th-Steps

Load the 4th-Steps alternating Carpet
Side Down and then Carpet Side Up.
Positioning Wheels face away from the
Cross Bar and Swing Arm Posts

Storage Cart Cross Bar

!

CAUTION

Two people are

always required to

move the loaded

Cart.

!

CAUTION

Never load anything

on the top swing

arms unless risers

have been properly

loaded first.

4th-Steps, Folded,

Carpet Side Up

Back Rails and Folded Risers
are not shown for clarity.

Summary of Contents for Tourmaster Storage Cart













Reviews: