Wenger Tourmaster Choral Riser Owner'S Manual Download Page 1

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Manufacturer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Take Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Lock Units Together . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Reverse Step Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Reverse Step Arrangement with Optional 4th-Step Addition  . . . . 8

Attach an Optional 4th-Step Addition  . . . . . . . . . . . . . . . . . . . . . . 9

Attach an Optional Back Rail  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Store an Optional Back Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Attach Optional Side Rails  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Store Back Rails on Optional Riser Cart . . . . . . . . . . . . . . . . . . . . 15

Store Risers on Optional Riser Cart . . . . . . . . . . . . . . . . . . . . . . . 18

Store 4th-Steps on Optional Riser Cart  . . . . . . . . . . . . . . . . . . . . 22

Replacement Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Basic 3-Step Unit   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4th-Step Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Back Rail  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Side Rails   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Riser Cart   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Owner's Manual

Tourmaster

 Choral Riser

Series 024H 3-Step with Foot Operated Slider

©Wenger Corporation 2022 

Printed in USA 2022-04 

Part #024H636-04

Wenger Corporation,

 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Contents

Note:

  Please read and understand these instructions before working with the riser.

Note:

  If you need additional information, contact Wenger Corporation using the information below.

Visit the Tourmaster Choral Risers web page at wengercorp.com for more information.

Shown with Optional 

Backrail

Summary of Contents for Tourmaster Choral Riser





























Reviews: