4
I
NSTALLATION
S
PORT
C
ART
T
RACK
B
RACKET
1. Using a pair of locking pliers or two C-Clamps, clamp the Track Follower Bracket to the SportCart
chassis, on the end opposite the handles. The SportCart Track Bracket should be centered side-to
side, and positioned vertically as shown in “Detail A”.
Note:
The SportCart may be tipped on it’s side if it would be more convenient.
Caution:
Use 2 people
to do this, to prevent injury or damage to the SportCart.
2.
Using the holes in the Track Follower Bracket as a guide, drill 4 holes in the SportCart chassis, 3/8”
diameter.
Note:
Only drill holes if they are not present in the chassis. Use existing holes if they are present.
3. Install the bolts and nuts and tighten securely.
SIDE VIEW
TRACK
SPORTCART
BRACKET
REAR VIEW OF SPORTCART
(END OPPOSITE OF HANDLES)
DRILL 3/8” DIAMETER HOLES (4)
USING BRACKET AS A GUIDE
(only if holes are not pre-drilled)
DETAIL A
BOTTOM OF SPORTCART CHASSIS
AND SPORTCART TRACK BRACKET
TO BE FLUSH.
