Wenger Sousaphone Holder Assembly Instructions Manual Download Page 2

2

B

EFORE

Y

OU

B

EGIN

Read and understand the complete assembly procedure before you begin.

Remove all items from the shipping carton.

The Wenger Sousaphone Holder is guaranteed free of defects in materials and workmanship for five 
full years.

Our guarantee assures you of either a full refund or repair or replacement of the defective materials or
workmanship without charge, at the discretion of our Customer Service Department. Just call a
Customer Service Representative at 1-800-887-7145 and state the reason you are dissatisfied. If a
product return is necessary, your representative will issue a return authorization. This is your sole
remedy for breach of this warranty.

Should you have a question or problem with any Wenger product, don’t hesitate to call, even if the
product is past warranty. It’s important to us that all our customers be satisfied.

This is the sole warranty made by Wenger. Wenger disclaims all other warranties, including the
warranties of merchantability and fitness for a particular purpose, as well as all liability for incidental,
consequential, special, and indirect damage. Wenger liability for direct damages shall be limited to the
amount you paid for the product involved. Wenger reserves the right to make product changes without
obligation to incorporate such changes into products previously sold.

Some states do not allow the exclusion or limitation of damages or warranties, so the above may not
apply to you. This warranty gives you specific legal rights. You may also have other rights which vary
from state to state.

W

ARRANTY

R

EQUIRED

T

OOLS

F

ASTENER

P

ARTS

L

IST

Screw, Self Tapping, 

5

/

16

3

/

4

”, Hex Head

Cap Screw, 

5

/

16

-18 x 1

1

/

4

”, Hex Head

Washer, Flat, 

5

/

16

” ID

The following tool must be supplied to assemble and install the Sousaphone Holder.

Electric Drill with 

1

/

2

” socket or 

1

/

2

" Socket Wrench.

In-Lb Torque Wrench is recommended.

Summary of Contents for Sousaphone Holder








Reviews: