Wenger Percussion Workstation Assembly Instructions Download

Page: 1 / 4

Please read and understand these Assembly Instructions before working with or using the

Percussion Workstation.
Refer to the illustrations on the following pages. If you need additional information, write or

telephone Wenger Corporation at the number below.

©Wenger Corporation 2012

Printed in USA 08/12

Part #147G300-04

Wenger Corporation,

555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: 1-800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com

Assembly Instructions

Percussion Workstation

ONTENTS

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . .2

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installing the Door Handles (Optional) . . . . . . . . . . . . . . . . . .3

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Music Desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Suspended Cymbal Holder . . . . . . . . . . . . . . . . . . . . . .4

Cymbal Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Summary of Contents for Percussion Workstation

Page 1: ...Printed in USA 08 12 Part 147G300 04 Wenger Corporation 555 Park Drive P O Box 448 Owatonna Minnesota 55060 0448 Questions Call USA 1 800 4WENGER 493 6437 Worldwide 1 507 455 4100 www wengercorp com...

Page 2: ...rect indirect special incidental or consequential damages resulting from the use or defect of this manual The information in this document is not intended to cover all possible conditions and situatio...

Page 3: ...ructions Read the complete assembly procedure before you begin REQUIRED TOOLS The following tools must be available to assemble the Percussion Workstation Phillips Head Screwdriver INSTALLING THE DOOR...

Page 4: ...NDED CYMBAL HOLDER Adjustable cymbal height and angle Vinyl coated bracket clamps in the Percussion Workstation edge CYMBAL CRADLE Holds up to 22 cymbals in the ready to use position Vinyl coated crad...