Wenger OnBoard 210A018 Assembly And Owner'S Manual Download Page 2

2

Important User Information

General

Copyright © 2021 by Wenger Corporation
All rights reserved. No part of the contents of this manual may be reproduced, copied, or transmitted in any form 

or by any means including graphic, electronic, or mechanical methods or photocopying, recording, or information 

storage and retrieval systems without the written permission of the publisher, unless it is for the purchaser's 

personal use. 
Printed and bound in the United States of America.
The information in this manual is subject to change without notice and does not represent a commitment on the 

part of Wenger Corporation. Wenger Corporation does not assume any responsibility for any errors that may 

appear in these instructions.
In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, 

indirect, special, incidental, or consequential damages resulting from the use or defect of these instructions. 

The manufacturer reserves the right to change this product at any time.
The information in this document is not intended to cover all possible conditions and situations that might occur.  

The end user must exercise caution and common sense when assembling or installing Wenger Corporation 

products. If any questions or problems arise, call the Wenger Corporation at (800) 4WENGER (493-6437)  

or +1-507-455-4100 worldwide.

Manufacturer

The OnBoard

®

 Field Podium is manufactured by:

 

Wenger Corporation 

 

555 Park Drive 

 

Owatonna, MN  55060 

 

(800) 4WENGER (493-6437) • +1 (507) 455-4100 

 wengercorp.com

Intended Use

•  This product is intended for indoor use in normal ambient temperature and humidity conditions —  

 

it must not be exposed to prolonged outside weather conditions.

•  This product is intended to be assembled and used only as described in these instructions.

Warranty

This product is guaranteed free of defects in materials and workmanship for five full years from date of 

shipment. A full warranty statement is available upon request.

Summary of Contents for OnBoard 210A018













Reviews: