background image

Owner’s Manual

Legacy

®

 Select Acoustic Tower

 

Contents

Important User Information

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Manufacturer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Precautions

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Product Terminology

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Tower Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Storing the Towers

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Moving the Towers

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Arranging the Towers

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Raising a Tower

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Lowering a Tower

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Maintenance

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Visit the Legacy Select Acoustic Tower web page at wengercorp.com for more details.

Note:

  Please read and understand these instructions before operating.

Note:

  If you need additional information, contact Wenger Corporation using the information below.

©Wenger Corporation 2018 

Printed in USA 2018-12 

Part #186A895-01

Wenger Corporation,

 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Summary of Contents for Legacy Select













Reviews: