12
Operation
Repositioning Drawers and Slide-Out Shelves
1. Drawers and Slide-Out Shelves can be repositioned at different heights in 1/2” (1.27 cm) increments
by relocating the Glides along the Rails.
a. Remove the Drawer or the Slide-Out Shelf and Stop Bracket from the Glides
by first pulling it outward, then tilting it up and lifting it out.
The Plastic Bumper does not need to be removed from the Slide-Out Shelf.
b. Remove either the top or bottom set of Screws and Clips attaching both Glides to the Rails.
c. Relocate the Glides at even elevations on each of the four Rails and reattach the
Screws and Clips to secure them into place.
d. Reinstall the Drawer or the Shelf and Stop Bracket.
Glide
Only the top or bottom set of Screws
and Clips need to be removed.
Plastic
Bumper
Stop
Bracket
Screws
