4
Assembly
1. Lay the desktop flat on the ground with the pilot holes facing up.
Be careful not to scratch the desktop surface!
2. Attach the legs to the bottom of the desktop in the orientation shown below.
a. If including the optional spacer tubes (#13), attach the legs and spacer tubes to the desktop pilot holes
using six #10-16 x 1.75" pan head screws (#1).
b. If not attaching the optional spacer tubes, attach the legs to the desktop pilot holes using
six #10-16 x 3/4" pan head screws (#2).
The use of spacer tubes must be the same on both legs.
If not using optional
spacer tubes
Back of
leg
If using optional
spacer tubes
Example only. If optional spacer tubes are used, they must be attached to both legs.
Spacer
Tube
(#13)
#10 x 1.75"
Pan Head Screws
(#1)
Back of
Desktop
#10 x 3/4"
Pan Head Screws
(#2)
Back of
leg