Wenger Essential Lab Assembly Instructions Manual Download Page 1

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Manufacturer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Required Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hardware Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Assembly Instructions

Essential Lab Workstation

©Wenger Corporation 2022 

Printed in USA 2022-06 

Part #256A113-03

Wenger Corporation,

 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Contents

Note:

  Please read and understand these instructions before starting the assembly.

Note:

  If you need additional information, contact Wenger Corporation using the information below.

Visit the Essential Lab Workstation web page at wengercorp.com for more information.

Summary of Contents for Essential Lab









Reviews: