STUDIO
®
MAKEUP STATION MIRROR REPLACEMENT
MIRROR REMOVAL
Warning: Always wear non-slip work
gloves and safety glasses when
replacing a damaged mirror.
Failure to observe this warning
can result in serious injury.
1. With one person (wearing work gloves)
holding the Mirror in place and a second
person using a small phillips screwdriver (2-
inch blade length) or offset phillips
screwdriver, remove the two pan head
screws that hold the mirror in place. Set the
screws aside.
2. Using work gloves, slide the broken mirror
downward about one inch and then lift the
mirror away from the Station and set it
aside.
Warning: Dispose of the broken mirror in a
safe manner. Failure to observe
this warning can result in Injury
from sharp edges of broken
glass.
Mirror
Pan Head Screw
Slide the Mirror downward
until the top clips disengage
the flange on the Frame.
Shelf Bottom Surface
Do not remove
the Counter.
Mirror
Pan Head Screw
Slide the Mirror upward
until the top edge of the
Mirror engage the Top
Retaining Clips.
Pan Head Screw
Shelf Bottom Surface
Do not remove
the Counter.
1. With two people working together, place
the Mirror against the Frame with Mirror
Flange at the bottom and the top of the
Mirror about an inch from the Top
Retaining Clips.
2. Slide the Mirror upward until the Mirror
Flange contacts the Frame and the top
edge of the Mirror engages the Top
Retaining Clips.
3. With one person holding the Mirror in
place, use a small phillips screwdriver (2-
inch blade length) or offset phillips
screwdriver and attach the two Pan Head
Screws (set aside when the broken Mirror
was removed from the Frame) that hold
the Mirror to the Frame.
Caution: Tighten the Pan Head Screws
only enough to be snug. Over
tightening the Screws will strip
the threads in the Frame.
INSTALL THE NEW MIRROR
Warning: Two people must work together to install the new mirror. Failure to observe this
warning can result in damage (dropping) and personal injury.
