7
PARTIAL END CLOSURE INSTALLATION
CONTINUED
ATTACH THE PARTIAL END CLOSURES TO THE END FRAME
1.
Using a 7/32-inch hex wrench and a 9/16-inch combination wrench, remove both Button Head
Screws and Acorn Nuts from each of the two
Upper
End Panel Brackets on the End Frame. Save
the Acorn Nuts and discard the Button Head Screws.
Do not remove the End Panel Brackets.
Upper End Panel
Bracket Assembly
Button Head Screw
Acorn Nut
Note: Remove both Button Head
Screws from both Upper End
Panel Bracket Assemblies.
2.
Hold the Partial End Closure against the Upper
End Panel Brackets.
a. Make sure that the Closure Shims applied in
step 3 on page 6 are between the Upper End
Panel Brackets and the Partial End Closure.
b.
Align the Partial End Closure Mounting Holes
to the Holes in the Upper End Panel Brackets.
Partial End Closure
Upper End Panel Bracket
Mounting Holes
Upper End Panel
Bracket Assembly
Partial End Closure
Mounting Holes
Partial End Closure
48-inch X-Cart
Note: Make sure that the Closure Shims are
between the Partial End Closure and the
Upper End Panel Brackets.
Note: Do not remove the
End Panel Bracket
