ASSEMBLY
1. Lay the saw horse upside down on a flat, dry
and level surface.
3. Open the saw horse legs as far apart as possible.
This will allow for maximum stability.
4. With four legs fully opened, flip the saw horse to
stand on its legs. Check that it is stable on the ground.
5. You may attach the four rubber feet onto the end
of the legs to increase stability and prevent the legs
from scratching the floor.
2. Swing open all four legs.
WARNING:
Read and understand all instructions. Failure to follow all instructions may result in serious
injury or property damage. If you have any questions or concerns, please contact our customer service at
(800) 232-1195, M-F 8-5 CST
4
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5
Summary of Contents for MSA15
Page 8: ...THANKS FOR REMEMBERING...
