background image

WARRANTY STATEMENT

REMEMBER TO SAVE THE RECEIPT. PROOF OF PURCHASE IS REQUIRED FOR ALL WARRANTY WORK.

WEN Products is committed to building tools that are dependable for years. Our warranties are consistent 

with this commitment and our dedication to quality.

LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE
GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con

-

sumer power tools will be free from defects in material or workmanship for a period of two (2) years from 

date of purchase. Ninety days for all WEN products, if the tool is used for professional use.

SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the 

ex-

tent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, 

without charge, which are defective in material or workmanship and which have not been misused, care-

lessly handled, or misrepaired by persons other than Seller or Authorized Service Center. To make a claim 

under this Limited Warranty, you must make sure to keep a copy of your proof of purchase that clearly 

defines the Date of Purchase (month and year) and the Place of Purchase. Place of purchase must be a 

direct vendor of Great Lakes Technologies, LLC. Third party vendors such as garage sales, pawn shops, 

resale shops, or any other secondhand merchant void the warranty included with this product. Contact 

[email protected] or 1-800-232-1195 to make arrangements for repairs and transportation.
When returning a product for warranty service, the shipping charges must be prepaid by the purchaser. 

The product must be shipped in its original container (or an equivalent), properly packed to withstand the 

hazards of shipment. The product must be fully insured with a copy of the warranty card and/or the proof 

of purchase enclosed. There must also be a description of the problem in order to help our repairs depart-

ment diagnose and fix the issue. Repairs will be made and the product will be returned and shipped back 

to the purchaser at no charge.

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS THAT WEAR OUT FROM REGULAR 

USAGE OVER TIME INCLUDING BELTS, BRUSHES, BLADES, ETC.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO TWO (2) YEARS FROM DATE OF PUR

-

CHASE.  SOME  STATES  IN  THE  U.S.,  SOME  CANADIAN  PROVINCES  DO  NOT  ALLOW  LIMITATIONS  ON 

HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUD

-

ING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS 

PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLU

-

SION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR 

EXCLUSION MAY NOT APPLY TO YOU.

THIS  LIMITED  WARRANTY  GIVES  YOU  SPECIFIC  LEGAL  RIGHTS,  AND  YOU  MAY  ALSO  HAVE  OTHER 

RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND 

FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE ELECTRIC TOOLS, BENCH POWER TOOLS, 

OUT-

DOOR POWER EQUIPMENT AND PNEUMATIC TOOLS SOLD WITHIN THE UNITED STATES OF AMERICA, 

CANADA  AND THE  COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE  WITHIN  OTHER 

COUNTRIES, CONTACT THE WEN CUSTOMER SUPPORT LINE.

18

Summary of Contents for HB3185





















Reviews: