TO INSTALL THE FEET:
1. Insert the M6x25 bolt (32) through the foot support pad (44) and foot support assembly (43). Tighten with an
M6 nut (45).
2. Install the foot support assembly (43) onto the frame and tighten with M8 nuts (64).
3. Repeat for the other foot.
TO INSTALL THE WHEELS:
1. Slide the wheel axle (48) through the wheel (42), flat washer (16), and wheel bracket on the frame.
2. Insert cotter pin (25) through the hole on the end of the axle to keep the wheel in place.
3. Repeat for the other wheel.
TO INSTALL THE HANDLE ASSEMBLIES:
1. Slide the M8x45 bolt (31) through the handle (19), handle bushing (67), generator frame, and the other handle
bushing (67).
2. Tighten with M8 lock nut (77).
3. Repeat for both handles.
NOTE:
Only the generator frame is shown to maximize clarity for assembly.
ASSEMBLY & ADJUSTMENTS
Fig. 1
13
Summary of Contents for DF1100X
Page 36: ...WIRING DIAGRAM 36 Neutral...
Page 37: ...EXPLODED VIEW PARTS LIST GENERATOR 37...