OPERATION
1. Connect the dust collector to your woodworking machine using a 4-inch dust collection hose.
NOTE:
Your dust collector is compatible with the
WEN 28200 10-feet dust hose
and the
WEN 28221 20-feet dust
hose,
available at
wenproducts.com.
Adaptors may be needed depending on the port size of your machine.
2. Make sure the dust collector switch is turned off and insert the power plug into a matching receptacle.
3. Switch on the dust collector and start operating your woodworking machine. Do not place your hands, lumber or
tools near the inlet opening while machine is plugged in or during operation. Keep animals and children away from
open dust collection inlets.
NOTE:
We recommend using your dust collector and woodworking machine on separate circuits, if possible. Some
woodworking machines draw large amounts of electrical current, and smaller circuits may not be able to handle the
machine and dust collector simultaneously.
4. Allow the dust collector to continue running for a few seconds after you turn off the woodworking machine. This
will clear the dust hose.
WARNING!
This dust collector is intended only for collecting wood dust and chips from woodworking ma-
chines. Do not use dust collector for anything except wood dust. Material such as liquids, aerosols, metal dust,
screws, glass, plastic or rock can cause sparks when coming into contact with any part of the collection system.
10
WARNING!
Never allow steel to come into contact with impeller. Impact with any hard material may result
in sparks which may cause fire. Be mindful of any situation that results in a risk of fire.
ASSEMBLY & ADJUSTMENTS
6.7 in (170mm)
2 in (50mm)
MOUNTING DIMENSIONS