![background image](http://html.mh-extra.com/html/wen/70712/70712_instruction-manual_956560007.webp)
7
KNOW YOUR MITER SAW
A
Operating Handle
B
ON/OFF Switch
C
Lower Blade Guard
D
Fence
E
Miter Table
F
Table Insert
G
Miter Table Lock
H
Miter Scale
I
Bevel Lock Knob
J
Slide Bar
K
Slide Lock Knob
L
Dust Extraction Port
M
Guard Retraction Arm
A
B
C
D
E
F
G
H
I
J
K
L
M
UNPACKING
If you find any pieces that are missing or wrong, do not operate the tool until the parts have been replaced. Failure
to do so could result in serious personal injury.
1. Remove all loose parts from the carton.
2. Remove the packing materials from around the saw.
3. Using the carrying handle carefully lift the saw from the carton and place it on a level work surface.
4. The saw has been shipped with the saw arm locked in the down position. To release the saw arm, push down
on the top of the saw arm, pull on the release knob (FIGURE 2), rotate it 45° and let go, slowly raise the saw arm.
5. Loose the slide lock knob (FIGURE 3).
WARNING - Do not lift the saw while holding on to the guards. Use the carrying handle.
Summary of Contents for 70712
Page 16: ...16 EXPLODED VIEW PARTS LIST ...
Page 20: ...20 Thanks for remembering ...