Wen 65910, Manual

Page: 9 / 32

UNPACKING
Carefully unpack all items from the box. Do not discard the packaging until the machine is completely assembled.
Check all parts and compare against the list below. If any part is damaged or missing, please contact our customer
service at (800) 232-1195, M-F 8-5 CST or email techsupport@wenproducts.com.
Parts
1. Drum Sander Assembly x1
2. Short Top Brace 14-5/8" x2
3. Long Top Brace 17-1/4" x2
4. Short Bottom Brace 20-1/4" x2
5. Long Bottom Brace 23-1/8" x2
6. Legs
x4
7. Feet Pads x4
8. Wheel Brackets x2
9. Wheels x2
10. Wheel Axle x1
11. Lifting Handle Assembly x2
12. Height Adjustment Wheel x1
13. Dust Port x1
PACKING LIST
9 8
12
2
S1 S3 S5 S7
S2 S6
S8 S10 S12
S11 S13
S14
S9
S4
10
1
6 7
13
5
3
11
4
Hardware
S1. Carriage Bolts M8-1.25 x 12 (Stand) x32
S2. Lock Nuts M8-1.25 (Stand and Wheels) x36
S3. Hex Bolts M8-1.25 x 16 (Wheels) x4
S4. Cotter Pins 4 x 20mm (Wheels) x2
S5. Flat Head Screws M6-1 x 10 (Handles) x4
S6. Lock Nuts M6-1 (Handles) x4
S7. Hex Bolts M10-1.5 x 30 (Sander) x4
S8. Flat Washer 10mm (Sander) x4
S9. Hex Nuts M10-1.5 (Sander) x4
S10. Acorn Nut M12-1.75 (Handwheel) x1
S11. Large Washer 12mm (Handwheel) x1
S12. Crescent Wrench 11/13mm x1
S13. Hex Wrench 5mm, 6mm x2
S14. Holding Pin (Changing Sandpaper) x1
9