easyled ikone tunable - 04/2021
7
en
EN
1. RECOMMENDATION
led PRoJeCtoRs 12V ~
-Manufactured in abs - optical medium that can be easily dismantled. Qualified people are needed to install this projector.
To only be used in the event of water immersion.
IMPORTANT:
this manual contains information of prime importance regarding safety measures to adopt when installing and
commissioning. it is consequently essential that the installer and the user read these instructions carefully before starting
to assemble and start up.
IMPORTANT SAFETY NOTICE:
electrical installations for swimming pools must comply with requirements of standard nF C
15-100 and regulations in force (domestic power grid).
NOTE
: if the sPotliGHt bulb’s power is supplied by an electronic transformer there is a risk it may not work (contact your
retailer for details).
Works only with a safety transformer (toroidal transformer) Class III 230V / 12V ~.
Provide a power supply 10% higher than the power absorbed by the spotlight.
a 100 V.a. transformer can power 2 projectors (12 color leds) : 2x 45 = 90 Va
Standard
6 Leds White
26 W
12 Leds White
42 W
12 Leds Color
36 W
Cable section
Distance Max
Box/
Projector
Cable section
Distance
Max Box /
Projector
Cable section
Distance Max
Box/
Projector
2 x 1,5 mm2
11 ml
2 x 1,5 mm2
7 ml
2 x 1,5 mm2
8 ml
2 x 2,5 mm2
19 ml
2 x 2,5 mm2
11 ml
2 x 2,5 mm2
13 ml
2 x 4 mm2
29 ml
2 x 4 mm2
18 ml
2 x 4 mm2
21 ml
2 x 6 mm2
44 ml
2 x 6 mm2
27 ml
2 x 6 mm2
31 ml
2 x 10 mm2
72 ml
2 x 10 mm2
45 ml
2 x 10 mm2
52 ml
see the table below to identify the section of cable depending on the length and power. For low currents and short son,
please be very superfluous. Remember that falls can be very high on bad connections, lugs and son loose oxidized.
if the external flexible cable or cord of this luminaire is damaged, it must only be replaced by the manufacturer, its service
agent or similarly qualified person, in order to avoid all risks. insert the cable in the grommet at the recess’s bottom and leave
a sufficient length to be able to pose the spotlight on the pool edge, since the grommet is tightened, the only thing to do now
is to insert the spotlight in its recess. For optimum light in your pool, always keep the bulb as below:
COLOR LEDS FOR HEADLAMPS
10 colours/5 continual colour sequences.
- Change colours or sequences (standard) by turning off the power button “on/oFF».
- optional: colour or sequence changes using the Monitor-Modulator Receptor kit with
wireless remote control.
- Remember the bulb colour or pre-defined sequence after switching off the power.