Weltem Icen WPC-23000, Owner'S Manual, Page: 6 / 16

6 7
Owner’s Manual WPC-23000
Operation
CONTROL PANEL
1. POWER BUTTON : Activates unit when POWER BUTTON is pressed. If POWER BUTTON is
pressed during operation, unit stops.
2.
BLOWER BUTTON : Indicates fan speed. (Not available for 3 phase model)
3. COOL BUTTON : Activates compressor and begins producing cool air in 5 seconds after
button is pressed.
4.
TIMER BUTTON : Enters to Timer Setting Mode by pressing TIMER BUTTON for 1 seconds.
Two digits on CURRENT TEMP indicate hour(s) and two digits on TARGET TEMP indicate
minutes. Set desired off-time by pressing SET TEMP BUTTONS.
5.
ALARM : Alarm indicator lights (blinks) and indicates abnormal system operation.
If Alarm occurs, compressor stops. System operation stops when Alarm light is activated
(blinks) longer than 3 minutes.
6.
SPOT/COOL : Lights (blinks) when unit is operated on SPOT/COOL mode.
7. SET TEMP BUTTONS : Change target temperature/data value by +/-1. Press the SET TEMP
BUTTONS to set temperature. Upper button is to heighten temperature and Lower button
is to lower temperture.
8. TARGET TEMP : Displays unit set temperature for ROOM/COOL mode only.
Set TARGET TEMP 0
℃
or 32
℉
on SPOT/COOL mode.
108&3 #-08&3 $00- 5*.&3
4105$00-
"-"3.
$633&/5
5&.1)6.*%
5"3(&5
5&.1)6.*%
1
2
7
3
4
6
5
9 8
Figure 9