When you finish registering new users then just press RESET button once (1x) to confirm changes.
5.0 Delete single user fingerprint
Short press the "SET" button four times (4 x)
, now you need to verify Admin fingerprint, then
system shows “
Delete User 04”
.
You have
2 seconds
to press user finger 04 to be deleted. Screen will show
FP No 04 Deleting.
After deletion screen will show “
Delete FP 05”.
You may continue to delete next fingers, or let the
system to close itself after two seconds.
IMPORTANT:
To delete particular user (let say his user FP is No. 10), you just press SET button again
when you see on the screen “Delete User 04”, until you reach number 10 on the screen;
then
user number 10 press his finger on the scanner to be deleted
.
You may keep pressing SET button do next user number(s) is you need to delete particular
users (number 13, 20 etc.).
Press RESET button 1 x (once) to confirm operation when you finish.
Note: you should keep User Records in a notebook or computer of all your users with their name
and registered FP number under which they have registered their finger(s).
5.1 Delete all user fingerprints
Short press SET button four times (4 x) until you see “
Delete all User”
on the screen.
Verify your Admin finger. System will delete all user fingerprints and let you know: “All User FP
Deleted”
5.2 Delete Admin fingerprint
Short press the "SET" button nine times (9x)
, until you see “
RESTORE TO INIT. STATUS”
Now you need to verify your first registered Admin fingerprint (you will see text on the screen
prompting to do this), then the system automatically enters into
deleting ALL
fingerprints,
including Administrator fingerprints.
If you have Remote opener(s) registered they also will be deleted.
If you use Bluetooth then this connection will also be disabled.
Your cylinder has entered FACTORY SETTINGS, so everyone can enter your room.
Note: Only Admin is able to execute this operation by using his first registered Admin
fingerprint number 01.
No other possibility exist to remove Admin fingerprint and to make system roll back to
Factory Settings.
