Welltech Computer Co., Ltd.
•
Jitter Opt Factor: Jitter buffer optimization factor from 0 to 12. The default
value is 7. Set to 0 will have lowest voice delay but have bad voice quality. Set
to 12 will have long voice delay but with better voice quality
•
EC Tail Length: Echo Cancellation Length, default value is 25ms
•
Silence Compress: Enable silence compress or not
T1/E1 Trunk Configuration
Start Path: Configuration
→
Trunk
Figure 6.3-1
Basic Parameter Description:
•
Interface ID: System parameter
•
Trunk ID: System parameter
•
Trunk Type: T1or E1 selection
•
Description: Description for this trunk ID
•
Termin Side: Network site or User Site (normally, you set to “
user site
” when
connect to switch)
o
User Side
o
Network Side
•
Trunk Mode: Trunk operation mode
o
Disable: Disable the trunk
o
Normal: Accept PSTN and VoIP calls
o
PSTN incoming only: Allow the PSTN incoming calls only
o
H.323 incoming only: Allow the H.323 incoming calls only
•
Hunting Method: PSTN trunk hunting method for available channel
o
Random: Hunt randomly
o
Cyclic: Initial hunt (after power-up/reboot) begins with B channel 1;
subsequent hunts begin with position following last successfully allocated
resource
o
Rotary: Hunt always begins with B channel 1
•
CAS Variance: CAS counting variance
•
Framing Method:
WellGate 5200 User Guide - V3
- 49 -